How to convert stl to a solid mesh enabler

#How to convert stl to a solid mesh enabler professional
#How to convert stl to a solid mesh enabler download

Swann Rack / Holocreators Click on вЂњfix a length of a line or the distance between a line and a vertex вЂњ. Swann Rack / Holocreators Design on the cross-section of the flange. Swann Rack / Holocreators Select the XY layer. Swann Rack / Holocreators Click on вЂњcreate new sketchвЂќ to enter the вЂќsketcherвЂќ workbench. Swann Rack / Holocreators If CTRL+D does not work, you can set the вЂњTransparencyвЂќ directly in the menuвЂ™s lower-left handД¬orner. Swann Rack / Holocreators The key combination CTRL+D opens a window in which we can set the вЂњTransparencyвЂќ. Step 3: Change the Transparency of the 3D Scan in FreeCAD and Create a ProfileДЄdjust the 3D scan to make it semi-transparent to allow for designing directly on it. This will simplify the CAD modeling process. Now optimally aligned in the FreeCAD coordinate system. Swann Rack / Holocreators Finally, switch to a top view and move the 3D Scan until it is in the center of the circle.

Swann Rack / Holocreators Change the view and repeat the process for the Y-axis. Swann Rack / Holocreators In the end, it should look like this. Swann Rack / Holocreators Switch to a side view and rotate the 3D Scan incrementally until it is aligned perpendicular to the Xaxis. Swann Rack / Holocreators Activate the checkbox вЂњApply incremental changes to object placementвЂќ.

Swann Rack / Holocreators Click on the three dots next to the вЂњPlacementвЂќ button. Swann Rack / Holocreators In the lower-left hand corner, click on the button вЂњDataвЂќ. This is done in the вЂњSketcherвЂќ workbench. Step 2: Correct Alignment (Placement) of the 3D Scan in FreeCADДЄlign the 3D Scan optimally along the X, Y and Z-axes. The reference circle sketch is now ready. So 76mm/2 FreeCAD will automatically calculate the radius ofДЈ8mm. Swann Rack / Holocreators Enter the radius of the diameter. Swann Rack / Holocreators Click on the button вЂњFix the radius of a circle or an arcвЂќ. Click on the button вЂњCreate a circle in the sketchвЂќ. Swann Rack / Holocreators Import the file вЂњprofessional-3d-scan-with-artec-space-spider-tankgeber-part.stlвЂќ into FreeCAD andДЄctivate the workbench вЂњSketcherвЂќ. Swann Rack / Holocreators The outer diameter of the flange is 75.97mm-round up to 76mm. Netfabb will automatically output the outer diameter. Swann Rack / Holocreators Select the outer edge of the flange. The button вЂњ3 points on circleвЂќ must be activated. Swann Rack / Holocreators Click on вЂњMeasure RadiusвЂќ. Swann Rack / Holocreators Click on the button вЂњNew MeasuringвЂќ.

#How to convert stl to a solid mesh enabler download

We have prepared the 3D Scan for download here. Swann Rack / Holocreators The original 3D scan is imported,вЂќprofessional-3d-scan-with-artec-space-spider-tankgeber-part.stlвЂќ, In this first step, a circle is defined using FreeCAD, which will help us align the 3D scan correctly. Step 1: Measure the 3D Scan in Netfabb and create a reference sketch in FreeCAD We have prepared the CAD file for download here. Swann Rack / Holocreators After reverse engineering using parametric modeling in FreeCAD, the finished solid model (STEPДЇormat) looks like this. Swann Rack / Holocreators This is the original 3D Scan (STL format) of the tank sensor part. Then, a reverseengineered 3D scan was created using parametric modeling in FreeCAD.

#How to convert stl to a solid mesh enabler professional

First, aДЈD scan was made using the professional 3D scanner, Artec Space Spider. Which is allows to import of much more data with more information to Inventor.The broken part, which serves as an example project, is a fuel sensor from a 50-year-old car. Use a different extension to collaborate About Importing Files from other CAD SystemsДЇrom version 2021 there is a linkВ between Revit and Inventor data with AnењњAD for seamless interoperability. Autodesk does not recommend the use of one over another, nor guarantee their successful operation. These 3rd party converters can be found on the Internet. Then import it into Inventor as a surface, stitch it, and convert it to solid, or work with the imported surfaces. Use 3rd party converters There are also 3rd party products that you can use to convert the STL file to a different format.

Open the produced SAT or DWG file in Inventor, then stitch and convert to solid as needed.

(This operation can also take a long time.)

Once the file has been imported, choose Export and select the file type *.SAT or *.DWG.

(This operation can take a long time, depending on the model's size and complexity.) Mesh Enabler | Inventor | Autodesk App Store Use 3ds Max to convert STL files to other formats You can also useВ 3ds Max to import the STL mesh and then export it to SAT or DWG format, which can later be imported into Inventor: